HELP Wiring up horn for Quick Release
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Jul 2002
Location: Everywhere you want to be
Posts: 1,388
Likes: 0
Received 2 Likes
on
2 Posts
HELP Wiring up horn for Quick Release
Have looked at both of these ways to wire up the horn... neither is clear...
Here's what I have thus far... What wire should I splice for the horn and run it back to the shoehorn??
PIC 1
PIC 2
PIC 3
PIC 4
Like I said... what is the next step from here. do I need to remove the entire yellow harness?? stumped!
And all three of the plugs run in a loom up under the center of the dash
Modified by Touch at 6:19 PM 7/16/2006
Here's what I have thus far... What wire should I splice for the horn and run it back to the shoehorn??
PIC 1
PIC 2
PIC 3
PIC 4
Like I said... what is the next step from here. do I need to remove the entire yellow harness?? stumped!
And all three of the plugs run in a loom up under the center of the dash
Modified by Touch at 6:19 PM 7/16/2006
#2
Honda-Tech Member
Re: HELP Wiring up horn for Quick Release (Touch)
here you go
http://importnut.net/civicsteeringswap.htm
http://importnut.net/civicsteeringswap.htm
Thread
Thread Starter
Forum
Replies
Last Post
AndyD
Honda Prelude
6
06-09-2004 09:17 PM