Help White Smoke!changed HD
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2007
Location: 0-K
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
Help White Smoke!changed HD
I changed Head Gasket Twice! the first time i tq it the right way the way the helms manual told me i used a buddy club head gasket i think it was two layer. I started up the car and it started to burn white smoke "HORRIBLY" i shut her off and took the head off and inspected it cleaned it all that stuff! But when i pulled the head off the sleeves where filled with coolant as soon as my head came off the block!
So i changed head gasket and put it all back together and started her back up and it did the same thing again! what do i do guys please help me out!
also it's idling high! 1500-2000 range
it's a OBD0 motor B16
all i did so far to try to help was
1-clean iacv (it was idling low before)
2-changed back to oem throttle body
So i changed head gasket and put it all back together and started her back up and it did the same thing again! what do i do guys please help me out!
also it's idling high! 1500-2000 range
it's a OBD0 motor B16
all i did so far to try to help was
1-clean iacv (it was idling low before)
2-changed back to oem throttle body
Thread
Thread Starter
Forum
Replies
Last Post
lifesastruggle
Engine Management and Tuning
5
02-15-2017 03:22 AM
CRuby
Honda Civic / Del Sol (1992 - 2000)
33
11-20-2014 11:07 AM
shm91
Honda Civic / Del Sol (1992 - 2000)
17
11-20-2013 06:01 PM