BLUE EH3

any got a good write up or good tips... i searched!

kraven9

One of the easiest things to do....

There are two bolts on the starter, just undo them and take it off. Oh yeah DISCONNECT the battery FIRST.

ham

yeah seriously, move some wires and the intake tube and 2 bolts on the starter...

inspector01

Take off the negative battery cable.
Disconnect the power wire to the starter and the lead wire.
Take off the 2 bolts
Remove the Starter

Very Simple

BLUE EH3

i know that. my biggest question is do i have to line up the gear?

ham

do you have a helms or haynes manual?

its as simple as everybody is saying.. take it off, put the new one on. done.

saywhat

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BLUE EH3 &raquo;</TD></TR><TR><TD CLASS="quote">i know that. my biggest question is do i have to line up the gear?</TD></TR></TABLE> No, the gear only makes contact with the flywheel when the starter is starting, and it doesn't line up you just throw it in.

BLUE EH3

thank u.

BLUE EH3

180 for a part.. omg

ham

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BLUE EH3 &raquo;</TD></TR><TR><TD CLASS="quote">180 for a part.. omg</TD></TR></TABLE>

used ones are all over the place. i got one for $25.

BLUE EH3

should i oil/geasd any thing?

saywhat

nope, you want to keep that area pretty oil and grease free, so it doesn't get on the flywheel and clutch.