oneEg1Tc

Ok. So. I just got a 97 ek and. I have a b16a sitting there. And. Was wondering. What's the things. I. Need to this swap but that I mean what type. Of harness and. Distributor. And so thanks. ..

sii.

iTrader: (1)

SEARCH.

jdmcivicracer89

first actually try searching. its been beat to death about this.. its a very easy swap and ull need the 99-00 harnass ecu mounts and axles

LovesOrangeSoda

can use your same harness with plug mods

oneEg1Tc

I had that. B16a. On my. Previous Eg. And. I. Had cables. Here. And there. But. I don't wannago thru the same. Thing . So will. A. Si harness do the trick. ?

geneeunit

yes, and no.. since you have a 97, its OBD2a.. 99-00 si's are OBD2b. wiring is a little different, so you would have to swap the underdash harness as well.

just get a 96-98 EX harness, with a obd2a -> 2b conversion harness and run the p2t ooorrrr.. obd2a to obd1 and run a chipped ecu.

D3vin

Are you sure you want to put a motor older than your car in it? B16a are from the 90s CR-X if I'm correct.

oneEg1Tc

i guss it one of my options , i mean the ek has a zc engine rusti and old it the b i got it for a god price .. i dunno what else to put in there having in mind im working on it on a budget

skaternak

ek? so you have a rhd?