Fliptard

My buddy has a 97 Hatch that he is converting the engine harness, dash, dash harness, floor and cabin harness to a 99-00 SI. Doing this, because he wants the climate control and everything was basically free.

So far he changed every harness (minus engine harness) to the SI ones EXCEPT the rear headlight harness from where it plugs together at the drivers side rear seat (behind the panel). His 97 had a 2 plug harness here where-as the SI has one big plug.

Does anyone have a wire diagram for each of the plugs (96-98 and 99-00 si) for the rear tail light harness. I cannot find one.

Fliptard

Car also has power everything, Moonroof. Rear wiper(not too worried aobut hooking back up)

CO671

iTrader: (1)

Did you see these links already?
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/diy-99-00-climate-control-swap-into-96-98-civic-%2Anew%2A-lots-pics-2320558/
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/faq-%2A%2A-mother-all-how-tos-96-98-ek-manual-climate-swap-99-00-ek-electronic-%2A%2A-605432/

Fliptard

Those are for keeping the 96-98 engine harness and cabin harnesses. We are changing everything, all the harnesses in the ENTIRE car EXCEPT headlight and REAR tail light harness is 99-00 SI. I need to know what wires are what on the 96-98 and 99-00 rear taillight hrnesses.