HELP! 92 honda civic DX D to B swap W/ auto
#1
HELP! 92 honda civic DX D to B swap W/ auto
hey guys, i have a 92 honda civic DX auto and am going to swap a B18B1 in it, i really need help wit how to get the auto wired up and whats all needed, IK IK go manual, i would but im too broke and in chronic pain 24/7 and have to work with what i got =/
PARTS: B18B1 LS from 94 integra, Rebuild kit for the B series, B series mounts B series TCM/TCU
ik i need the wire harness piece for the TCM and have looked and looked (research wise and at the yard) to find where its at, i also need to know all else that i need to wire it up and how to and all that, i also have a 97 auto ECU OBD2 (idk if its A or B) that itd like to trade for an OBD1 Auto B18B1 ECU
Both cars ARE OBD1 and i really REALLY need help with this, ive looked over and over and over for 2+ weeks and have found nothing except other forums asking the same thing then so and so person says i figured it out n leave it at that without saying how or what they did, im also going to make a video when i do this swap so anyone/everyone that wants or have no choice like me to do this can with ease, i know its going to be a bit of a headache but i have no choice, Also anyone that helps me with this will be credited on the vehicle with a sticker (Built by) then names of the the people (nicknames or names whatever floats your goat XD) and no i cannot machine the D its done for and if i did itd have valve interference and then itd need to get a shimmy plate to replace what was machined and idk where to get one n the company's ive found charge a few hundred just for that stupid shimmy >_>
also i cant remember but can manual and auto CV axles work both the same on ether or? or just find an auto n take the CV's?
thank you for taking your time out to help me with this ittle mean the world to me for anyone that can help ^_^
Zim 107
PARTS: B18B1 LS from 94 integra, Rebuild kit for the B series, B series mounts B series TCM/TCU
ik i need the wire harness piece for the TCM and have looked and looked (research wise and at the yard) to find where its at, i also need to know all else that i need to wire it up and how to and all that, i also have a 97 auto ECU OBD2 (idk if its A or B) that itd like to trade for an OBD1 Auto B18B1 ECU
Both cars ARE OBD1 and i really REALLY need help with this, ive looked over and over and over for 2+ weeks and have found nothing except other forums asking the same thing then so and so person says i figured it out n leave it at that without saying how or what they did, im also going to make a video when i do this swap so anyone/everyone that wants or have no choice like me to do this can with ease, i know its going to be a bit of a headache but i have no choice, Also anyone that helps me with this will be credited on the vehicle with a sticker (Built by) then names of the the people (nicknames or names whatever floats your goat XD) and no i cannot machine the D its done for and if i did itd have valve interference and then itd need to get a shimmy plate to replace what was machined and idk where to get one n the company's ive found charge a few hundred just for that stupid shimmy >_>
also i cant remember but can manual and auto CV axles work both the same on ether or? or just find an auto n take the CV's?
thank you for taking your time out to help me with this ittle mean the world to me for anyone that can help ^_^
Zim 107
Thread
Thread Starter
Forum
Replies
Last Post
yask4it
Honda Civic / Del Sol (1992 - 2000)
13
10-09-2011 05:26 PM
yurboy
Honda Civic / Del Sol (1992 - 2000)
2
07-31-2011 05:38 PM
elchapin
Honda CRX / EF Civic (1988 - 1991)
2
06-20-2008 01:51 PM