Help
07-02-2019, 07:58 AM
#1
Trial User
Thread Starter
Join Date: Jul 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Help
I have a 97 hx I am in process of swapping a 99 d16y8 ex into.
I have changed to a p2p ecu and I was going to run an ex harness but haven't had any luck finding one.
We decided to use the hx harness I have since it has vtec on it along with a secondary o2 sensor .
What I need help with is advice or some direction.
It would be much appreciated.
5 wire o2 sensor, how to make it 4 wire so I can finish up this swap and get my car running around town, hopefully.
Ps.. unless someone has a good 96 97 98 ex vtec harness for a y8 they will sell
I have changed to a p2p ecu and I was going to run an ex harness but haven't had any luck finding one.
We decided to use the hx harness I have since it has vtec on it along with a secondary o2 sensor .
What I need help with is advice or some direction.
It would be much appreciated.
5 wire o2 sensor, how to make it 4 wire so I can finish up this swap and get my car running around town, hopefully.
Ps.. unless someone has a good 96 97 98 ex vtec harness for a y8 they will sell
Last edited by Jean Castio; 07-02-2019 at 08:03 AM. Reason: Addition
