header type?
#1
Thread Starter
Join Date: Dec 2002
Location: Rocky Pt, NY, USA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
header type?
Im waiting on a GSR drivetrain to drop into my 92 hatch. Question is: what kind of headers should I go with, 4-2-1 or 4-1. I want decent low and midrange as this is my commuter (and everything else car). I see $100 headers on Ebay (Megan racing, etc), anybody familiar with these? Friend told me go with stainless only, the mild steel ones, even ceramic coated, just dont last. Know of any links to exhaust science (art) as it applies to Hondas? Thanks
#2
Honda-Tech Member
Re: header type? (dennisman17)
Search here for theories on exhaust flow.
Also, stainless is the way to go, and 4-2-1 will provide the most midrage feelable torque, where as 4-1 will provide more up-top power and more noise.
Also, stainless is the way to go, and 4-2-1 will provide the most midrage feelable torque, where as 4-1 will provide more up-top power and more noise.
#3
Thread Starter
Join Date: Dec 2002
Location: Rocky Pt, NY, USA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Re: header type? (Hater)
Thanks, gives me a direction to go.
Search here for theories on exhaust flow.
There is no link associated with this?
[Modified by dennisman17, 3:12 PM 3/30/2003]
Search here for theories on exhaust flow.
There is no link associated with this?
[Modified by dennisman17, 3:12 PM 3/30/2003]
#4
Honda-Tech Member
Re: header type? (dennisman17)
Offsite on a different Honda forum, is an excellent thread about headers and exhaust...
http://www.hondavision.com/forumdisp...?s=&forumid=78
You may have to create another ID on that forum to check it out.
http://www.hondavision.com/forumdisp...?s=&forumid=78
You may have to create another ID on that forum to check it out.
Thread
Thread Starter
Forum
Replies
Last Post