SOHC Warrior

Hello HT I have a problem that I myself cant fix because Im more of an engine person...

I have gotten a new harness for my Civic (Right harness, already confirmed) and everything plugs up but when I plug up to the ECU in the car the plugs dont go where the wires are heading. Anybody thats really good at this know a fix? Its my DD so Im in need of speedy repair here. Thank you in advance.

Heres a pic, sorry if its oversize.

kyden

one of your harnesses is wrong. i assume you have a 96-00. you appear to have an obd2b engine harness. your jumper harness is for obd2a. you're also missing the connector from the dash harness.

SOHC Warrior

I have the dash plugged in just not in the picture. Is there a Adapter for the obd2b to obd2a? Thank you for the help im really not into the electrical aspect of this.

SOHC Warrior

http://www.ebay.com/itm/CONVERSION-J...06%26rk%3D1%26

Would that work?

kyden

what ecu are you using?

kyden

you plugged it in after you took the picture? or are you talking about the green plug?

Jimster480

what ECU are you using and which plugs dont line up? I dont get what you are saying exactly.

SOHC Warrior

Its plugged in. It just wasnt in the pic.

And to Jimster im using a P28 ECU and in the pic the wires that run to the central plug-in area from the ECU doesnt match with the harness, besides the blue plug. Hell my last harness had three plugs instead of two. Just wondering if theres a nice cheap fix. As im not very financially secure.

kyden

is your car a 96-98 or 99-00? if you have a 96-98, you have the wrong engine harness.

if you have a 99-00, you have the wrong jumper harness.

SOHC Warrior

96 civic. '00 engine/harness...00' ECU.

kyden

you have the wrong engine harness, hence why you're missing the dash plug i asked you about.

Former User

You MUST provide all pertinent information about your car and engine. Failure to do so may result in thread closure. This key information belongs in your first post.

Please read the forum rules.