1 2 NV

yesterday i took my hatch to the local concrete yard to have it weighed. whats ur guess on how much it weighs. its a 92 cx hatch with dash and 2 seats, DOHC motor?? will edit later tonight!!!

PSU

iTrader: (2)

2,155 lbs

guyuenvy

2000 lbs

1 2 NV

wrong answer

1 2 NV

damn close

Jonathan_ED3

guessing the concrete yards are wayyy off anyway dude. i weighed my CX at one and it weighed in at 2600lbs...i was like 'ugh, yeah..okay' haha. anyway, what'd they say it weighed?

liam821

My civic hatch was 2080 pounds. I have a civic SI, stripped interior, no a/c, just a dash and two seats...and a ton of turbo stuff.

So im guessing around 1950-2050 for you.

liam


[Modified by liam821, 5:06 PM 6/4/2002]

1 2 NV

sounds like someone needs to recalibrate their scale.

1 2 NV

ur goin the wrong way.

acuracing

2074.8755996699334565646 lbs.

JV

Who cares........ This is'nt a damn game show. It's Honda-Tech.......

1 2 NV

1980 is what the scale says. the only thing i have left to take out is the sound deadening on the firewall, headliner (staying in) and donut.

B18C5-EH2

My car weighed 2040lbs. with a full ITR engine/tranny swap and full Integra brakes, Koni sus (heavier) rear swaybar, and both bumper supports left in.

I also still have my stock ITR cast-iron Exhaust manifold, ITR flywheel, and airbag steering wheel (but all the airbag ECU and wioring has been removed) so I still have room for improvement.

1980lbs. isn't too far-fetched, but what is your set-up?

Rear discs? Bumpers in or out? Just curious.

I have removed all the tar (wasn't much in the CX anyways:hammer, firewall mat, headliner, carpet, all interior plastics, no radio, no speakers, really all that's left inside is a dash and 2 1997 Type D black GS-R seats in cloth.

I feel that removing the bumper supports is not a good idea. They are there for our protection, and if some dick crosses into my lane and I hit head-on I'd like at least SOME extra protection for my motor, and if I get rear-ended I'd like to try and keep my car still since it is not replaceable.

Set-up? Detailed I mean?

1 2 NV

my setup is sorta like urs. C1 w/ ITR head, JE pistons, eagle rods, JUN 3 cams/gears, titanium retainers, valve springs, P72 w/VAFC (P28 chips in the mail), DC JDM header. i have 2 stock civic seats, headliner, front A pillar plastic, integra dash, GSR cluster, no fan or heater core, carpet intact (ugly), poly bushings, no bumper supports. if u want more details just ask.

PSU

iTrader: (2)

dang thats light, but the scale is prolly off