iliv2xlr8

Hello all,

I thought I would post up my progress on my brake and suspension swap. I should be putting everything in next week. It's been a fun project. The chassis will pretty much be ready for my LS turbo swap coming up. I will also be doing a full write-up when completed. Here are some pics and my running list.

GSR Disc brakes front & rear
JDM ITR Master Cylinder & booster
RS 40/40 Prop valve
Brembo blanks
Hawk HPS pads
Goodridge SS lines
Complete Polyurethane Bushings
Eibach Pro-Sreet Coilovers
Eibach Sway bars Front & Rear
Moog ball joints & Tie rods

kojack_0

dont forget to add to the list:


one clean hatch.

iliv2xlr8

Thanks.

It's taken a good bit of work to get it looking good. What started out as a impulse buy for a reliable daily driver has turned into a pretty fun project. This is my first Honda. I have been building Rx7's for the past 10 years, but this little hatch has definitely grown on me. The car is slowly getting closer to where I want it to be. I have the auto D15 blues..... but my LS will be in there soon, and then a healthy shot of boost...:D

I had plans of going JRSC B18C, but I can't resist a good turbo build....:D

miguel329

very clean hatch!! make sure you keep it locked up away from thieves!

Type-S Eg Hatch

Same suspension on my eg minus Well for now atleast.

1992hondacivicvx

when u going to do the conversion