Greddy EK lip on a 2.25 Drop
#1
Thread Starter
Join Date: Dec 2004
Location: Norcross, Ga, United States
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Greddy EK lip on a 2.25 Drop
Ok i am considering to buy the greddy front lip and from what i hear is that the lip hangs real low. The drop on my EK is 2.25in does anyone out there think that with my drop and the size of the lip will be safe for daily driving use?? btw my wheels are 16in on 205/40/16 tires. Any suggestions would help me out
http://www.upgrademotoring.com...p.jpg
http://www.upgrademotoring.com...p.jpg
#2
Re: Greddy EK lip on a 2.25 Drop (KingElli)
Well I am not sure how much help I will be, but I have a Ek Civic with a Tsumani front lip and 17 in wheels with a 1.7 inch drop. (lip is probably not as low as the Greddy, and obviously my ride height is a little bit higher) But I DO scrape the bottom of the lip in and out of driveways. I try to take extreme angles when entering a drive, but some are inevitable.
Just a note to say that sounds like my car is a little higher in the front, and I scrape on SOME drives! If you'd like a picture view of the lip please see below.
Just a note to say that sounds like my car is a little higher in the front, and I scrape on SOME drives! If you'd like a picture view of the lip please see below.
#3
Re: Greddy EK lip on a 2.25 Drop (SE7EN3S)
dont have an ek but i do have an eg with type r front and rear lips. My car is slammed and I dont have to many problems, and i am currently stationed in louisiana the roads are terrible here.
Thread
Thread Starter
Forum
Replies
Last Post
b18b_ek9
Southern California (Sales)
1
03-30-2012 03:20 PM
redludevtec
Honda Prelude
14
10-03-2004 06:23 AM