Good SPRING RATE In KG/MM for TANABE Springs
07-14-2006, 08:54 AM
#1
Thread Starter
Join Date: Apr 2006
Location: Pope, NC
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Good SPRING RATE In KG/MM for TANABE Springs
Ok Im looking at getting eather
TANABE NF210 with a spring rate of F3.5/ R2.2 km/mm -- with a F1.5"/ R1.2" Drop
or
TANABE GF210 with a spring rate of F4.1/ R2.6 km/mm -- with a F1.5"/ R1.2" Drop
I know about spring rake in LBS but not in KM/MM
Thanx
TANABE NF210 with a spring rate of F3.5/ R2.2 km/mm -- with a F1.5"/ R1.2" Drop
or
TANABE GF210 with a spring rate of F4.1/ R2.6 km/mm -- with a F1.5"/ R1.2" Drop
I know about spring rake in LBS but not in KM/MM
Thanx
07-14-2006, 03:39 PM
#2
Member
Join Date: Jan 2006
Location: just north of Tijuana
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good SPRING RATE In KG/MM for TANABE Springs (SLIKKCHICK)
to convert from kg/mm to lb/in, multiply each figure by 55.88
which gives you
NF210: 196/123
GF210: 229/145
which gives you
NF210: 196/123
GF210: 229/145
Thread
Thread Starter
Forum
Replies
Last Post
Superhatch
Honda CRX / EF Civic (1988 - 1991)
10
02-08-2002 06:59 PM
