Gap
09-10-2004, 11:42 PM
#1
Thread Starter
Join Date: Sep 2004
Location: Sacramento, Ca, USA
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Gap
ok...I bought this Cx after selling my Crx, so I'm new to this whole EG craze..more into EF myself. But anyways, It has a stock hood with hood pins, z3 fenders, and a stock front bumper. The car had aftermarket headlights and corners. The corners were black housed projectors and "jdm" black housing corners.
Here's the thing. I replaced the entire front end with stock parts, but there is a gap on top of each corner. The body panel fitment is perfect, because it was put on by a respectable body shop. They tell me that there is a gap because the corners are aftermarket. Is this true? Does this happen sometimes?
If anyone has experience with this type of problem please elaborate...
Here's the thing. I replaced the entire front end with stock parts, but there is a gap on top of each corner. The body panel fitment is perfect, because it was put on by a respectable body shop. They tell me that there is a gap because the corners are aftermarket. Is this true? Does this happen sometimes?
If anyone has experience with this type of problem please elaborate...
09-10-2004, 11:52 PM
#3
Honda-Tech Member
Join Date: Jan 2002
Location: Los Angeles, CA, USA
Posts: 26,519
Likes: 0
Received 2 Likes
on
2 Posts
Re: Gap (eg u y)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg u y »</TD></TR><TR><TD CLASS="quote">oops...wrong forum. My bad...can moderator please move this....again..sorry</TD></TR></TABLE>
No problem.
No problem.
Thread
Thread Starter
Forum
Replies
Last Post
lightsleeper
Southern California (Sales)
4
06-29-2005 06:41 PM
