Fuel pressure on GSR swap.
08-13-2003, 11:25 AM
#1
Member
Thread Starter
Join Date: Sep 2002
Location: Victoria, BC, Canada
Posts: 1,341
Likes: 0
Received 0 Likes
on
0 Posts
Fuel pressure on GSR swap.
Just wondering what pressure to run. The motor has an intake, Tanabe RM and some pulleys. It was default set to 48 psi which is way to high.
Any thoughts?
Any thoughts?
08-16-2003, 09:15 PM
#6
Honda-Tech Member
Join Date: Jan 2003
Location: my house, ga, Us
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
In my JDM b18C swap del sol my pressure is at about the 50 - 54 psi WOT throttle and 44 -46 at idle range.....anything less and it would be sluggish in vtec and my A/F guage would jump to lean in vtec...i also have i/h/e cat/IM/cams also
Thread
Thread Starter
Forum
Replies
Last Post
DLOTYPER
Forced Induction
6
05-31-2003 10:16 PM
