StreetEG

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StreetEG &raquo;</TD></TR><TR><TD CLASS="quote">maybe omni is what the O stands for in OBX? </TD></TR></TABLE>

get it ? cause OBX sucks? no? anyone? well i thought it was funny

Cole D

this sucks I really wanted one of these

reactiondc2

i bought one....didnt even make it out of the driveway,actually i didnt even get the car started before it was broken now everyone is like well its a new product and every new product can have a bad batch but the thing is if its a bad batch <U>why are they still selling it before it is fixed</U>...bought mine from robear and when i told them i wanted a refund they started givin me the runaround and now i havent heard a thing from them and i was too busy trying to get my car ready for boti to deal with it...all i know is that neither omni nor robear will ever see another cent of my money after all this b.s.....so yea i hope that losing a customer was worth the 179 bucks
omni
robear

coconutsoldier

goddamnit, my stock master cylinder has been leaking down
my firewall for a couple years now so I thought I would try
one of these but haven't installed it yet. And this is the ****
I get to look forward too when I do install it. I will mail Omni
some anthrax if mine breaks too.

Kamin

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pdiggitydogg &raquo;</TD></TR><TR><TD CLASS="quote">thats what happens with brand new products

funny how omni was the **** when they came out because of low prices and now...well...you know</TD></TR></TABLE>

in the words of full-race

"the sour taste left by a bad product is felt long after the good taste low price is gone"

or something like that

omni = ***

you get what you pay for

buyer beware

bla bla bla. i feel no pity for those who cheap out then bitch. it sucks this happened to you, but what did you expect.

ATS*Mark

"your timing will be off between your hands and your feet."


bahaahahahahhahaahhahhaahahhahahahahahhaahah get the **** out of here.

reactiondc2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kamin &raquo;</TD></TR><TR><TD CLASS="quote">

in the words of full-race

"the sour taste left by a bad product is felt long after the good taste low price is gone"

or something like that

omni = ***

you get what you pay for

buyer beware

bla bla bla. i feel no pity for those who cheap out then bitch. it sucks this happened to you, but what did you expect. </TD></TR></TABLE>jus so you know the omni mc was far more expensive then the 35 dollar replacement that has been serving me reliably in my car since the omni pos went dead

kNOwLedGeDA9

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">"your timing will be off between your hands and your feet."


bahaahahahahhahaahhahhaahahhahahahahahhaahah get the **** out of here.</TD></TR></TABLE>

Always a positive comment from this guy....

coconutsoldier

Good contribution to the thread. I am glad you
took the time to write all that **** down.
You must feel real cool

ATS*Mark

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coconutsoldier &raquo;</TD></TR><TR><TD CLASS="quote">Good contribution to the thread. I am glad you
took the time to write all that **** down.
You must feel real cool </TD></TR></TABLE>


so im assuming you guys actually believe that crap? no wonder everyone is buying this product lol.

coconutsoldier

I knew a few people that had the oem mc go out on them too, so
I thought they weren't designed all that well either. So instead of
buying one that was almost certainly going to go out on me like mine
and my friends did, I thought I would try a different one.
Also, I was under the impression that omni made decent parts from
the few reviews I had read. So why the ****
is that a reason to post up that stupid **** you wrote?

CivicSiRX

go oem! 01 integra clutch mc goin strong for me. 30 bukks from the junkyard. i acutally look at the omni mcs but i figure i save money and that reduce clutch travel isnt worth to me imo.

sagron69

well i can see where the frustration is coming from but to tell you the truth i picked up the Omni rear LCA and ****, they handle better than SRR's and i know i'll get **** for saying that but they do... my cornering has improved and i get less body roll... so maybe i got lucky... knock on wood though i dont wanna end up like you guys, sorry to hear about the problems though

fullraceacura

i really wanted to pick up a omni big brake kit and one of the clutch master cylenders, maybe i will wait a while until i see more good threads about the products, i have not seen any threads about the brake kit though, has anybody bought one?

Tyson

i hope this remains a rhetorical question, but would you trust an omnipower product replacing your brakes, after seeing their coilovers, springs, upper control arms, lower control arms, and master cylinder clutches fail?!

CivicSiRX

ah i c the butt dyno shows u that cornerin is improved with lcas.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sagron69 &raquo;</TD></TR><TR><TD CLASS="quote">well i can see where the frustration is coming from but to tell you the truth i picked up the Omni rear LCA and ****, they handle better than SRR's and i know i'll get **** for saying that but they do... my cornering has improved and i get less body roll... so maybe i got lucky... knock on wood though i dont wanna end up like you guys, sorry to hear about the problems though </TD></TR></TABLE>

Tyson

someone explain to me how new LCA reduce body roll.

Cherchez La Ghost

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tyson &raquo;</TD></TR><TR><TD CLASS="quote">someone explain to me how new LCA reduce body roll. </TD></TR></TABLE>

maybe he installed sway bars at the same time as the LCAs and thinks the LCAs reduced his body roll.

CivicSiRX

it doesnt. hes retarded. aftermarket lca only provide two benefits. 1 is someone who needs replacement lcas and they come with mountin holes for rear sways. 2 is strictly bling. they weight like 2 lbs less then oem lcas, and manufactures claim its unsprung weight but watever.

i got srr ones cuz my oems bent durin an accident and gives me the mountin hole for my rear sway. the added bling was just part of the deal. well in my case.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tyson &raquo;</TD></TR><TR><TD CLASS="quote">someone explain to me how new LCA reduce body roll. </TD></TR></TABLE>

94_HATCH

Damn man this **** sucks...i was just gonna post the link for the last thread but then i realized it was also your thread That sucks that they just sent you another one of the bad batch. I dont have any omni products on my hatch but i wouldn't buy them anyways.

I remember in your last thread kteller was gonna help someone out but would NOT refund any money for an abivously faulty/pos product. Even though Omni said he would refund anyone their money back if they didn't want to wait for the replacement.

omni suspension=accidents
omni clutch ms=tow truck bills
omni front camber kit=keep your oem parts

MugenHonda

There is no point in it when stock MC can handle the power.

JDM-EJ1

Damn, looks like I'll stay away from OMNI. Sorry to hear about that man.

litterbox

I haven't had a problem with my omni front/rear camber kits and I've had them for about a year.

Solracer

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G U E C O &raquo;</TD></TR><TR><TD CLASS="quote">any recalls on suspension?</TD></TR></TABLE>

Yea just a little one because the lower collar was snaping in half....

mike1114

iTrader: (1)

want a real master cylinder? Look into Tilton's. It requires removing your tranny to install but it really does work, decreases pedal effort and also eliminates the slave cylinder completely.


Tilton = $350.00, little pricey BUT IT WORKS.

I even hate OEM Master Cylinders, if another one fails on me I swear I'm buying the tilton.