Flat spots in powerband after B18C Swap.
#1
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Oxnard, CA, USA
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Flat spots in powerband after B18C Swap.
Got my swap in about a week ago, everything is running perfect. NO CEL, IAB is working beautifully after a little trial and error.
Only mods is a custom short ram intake I made from an Autozone intake pipe, Home Depot PVC connector and a K&N filter.
I noticed that from the moment I start the car to about 25 minutes of driving it feels GREAT! Pulls really hard. After about 30 minutes of driving or so, it starts to feel a bit sluggish, if I give it half gas I feel flat spots in my powerband. Almost like its struggling but not that noticeable.
Do you guys think it could be heatsoak? Maybe the stock DX fuel filter or fuel pump? I checked my timing its at stock 16 degress BTDC.
Only mods is a custom short ram intake I made from an Autozone intake pipe, Home Depot PVC connector and a K&N filter.
I noticed that from the moment I start the car to about 25 minutes of driving it feels GREAT! Pulls really hard. After about 30 minutes of driving or so, it starts to feel a bit sluggish, if I give it half gas I feel flat spots in my powerband. Almost like its struggling but not that noticeable.
Do you guys think it could be heatsoak? Maybe the stock DX fuel filter or fuel pump? I checked my timing its at stock 16 degress BTDC.
#2
Member
Join Date: Oct 2003
Location: Highways of, IL, US
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Re: Flat spots in powerband after B18C Swap. (Revolution2zz)
same thing happened wit my swap, but after installing the fuel pump and changin the filter it felt better....couldve been a mental thing though
Thread
Thread Starter
Forum
Replies
Last Post
nexgen91
Honda CRX / EF Civic (1988 - 1991)
6
10-15-2006 05:48 PM