Flaring Help: GSR Master Cylinder in EG6
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: South Beach and Chicago, FL, USA
Posts: 6,183
Likes: 0
Received 1 Like
on
1 Post
Flaring Help: GSR Master Cylinder in EG6
I'm trying to finish off my Master Cylinder Swap in my EG.
The only problem has been flaring the lines for the GSR Master Cylinder which has 1 fitting which is bigger.
It requires a double flare, and the Craftsman Flaring Tool I have keeps letting the line slip through. Any suggestions?
Also, from people who have done the swap...Which Line goes into Which Side.
On the Civic, Both lines go into the left side of the MC, but on the GSR there is the larger fitting on the right....can anyone take a picture of their setup and email it to me @ Suprdave726@aol.com? Im trying not to flare the wrong line into the wrong side. Any adverse effects of doing so?
Thanks,
Suprdave
The only problem has been flaring the lines for the GSR Master Cylinder which has 1 fitting which is bigger.
It requires a double flare, and the Craftsman Flaring Tool I have keeps letting the line slip through. Any suggestions?
Also, from people who have done the swap...Which Line goes into Which Side.
On the Civic, Both lines go into the left side of the MC, but on the GSR there is the larger fitting on the right....can anyone take a picture of their setup and email it to me @ Suprdave726@aol.com? Im trying not to flare the wrong line into the wrong side. Any adverse effects of doing so?
Thanks,
Suprdave
#2
Thread
Thread Starter
Forum
Replies
Last Post
alscrx
Honda CRX / EF Civic (1988 - 1991)
1
05-09-2008 04:34 PM
Suprdave
Hybrid / Engine Swaps
2
08-04-2001 10:04 PM