Rojas209

So i got skunk2 S1 cams and gears for my b16a2, ive never done this before (i want to do it that way i can learn) but still im going to get some help from a friend who works for a muscle car shop, but i just wanted to kno if there is anything tricky or something were most people screw up on, that way i can avoid having any problems. any tips, or a good wright up would be appreciated........thanks




Modified by Rojas209 at 3:16 PM 3/17/2008

instrument

dont forget to do a valve adjustment afterwards.
and try not to drop any aborted fetuses into the head.

JEGD16Z6

Tourqe specs are very important and the order you loosen and tighten your bolts. make sure you clean and lube the cams before you put them in.

z6hatchboy

Make sure to get it in time, and if you using adj cam gears, usually each mark = 2 degrees

Rojas209

what do u lube them with, just oil? Any special tools required, other than the valve lash tool

Padawan

http://www.c-speedracing.com/h...m.php