Field SFC-vtec switches
01-02-2009, 09:01 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2007
Location: Ashtabula, OH, USA
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Field SFC-vtec switches
I'm running a B20 with a gsr head. and the shell is ek
The only wires for the controller are wired are vtec's,power,rpm,and ground.
Hondata controls vtec.
I wanted to use the contoller for acurate rpm and a vtec light.
The vtec light comes on at 2k. hondata says 5k.
How should I have the switches on the back for it.
It was set up for a gsr swap in an eg
The only wires for the controller are wired are vtec's,power,rpm,and ground.
Hondata controls vtec.
I wanted to use the contoller for acurate rpm and a vtec light.
The vtec light comes on at 2k. hondata says 5k.
How should I have the switches on the back for it.
It was set up for a gsr swap in an eg
Thread
Thread Starter
Forum
Replies
Last Post
specialedition
Honda Prelude
8
05-19-2005 12:11 AM
