vtecnologist

i picked up up a pair of clean ep3 seats from an 04 si
i wanted to put them in my eg but looking at the rails its not as simple
as swaping the rails from any other honda seat
anyone do this before, and how?
thanks

deadline

https://honda-tech.com/zerothread?id=347548- S2000 Seat Install
https://honda-tech.com/zerothread?id=1479028- S2000 Seats into Del Sol
https://honda-tech.com/zerothread?id=1436635- Integra Seats into EJ
https://honda-tech.com/zerothread?id=627857- Rear Seats in EG Hatch
https://honda-tech.com/zerothread?id=481758- ITR Seats into EK and EG
https://honda-tech.com/zerothread?id=826594- Del Sol Seats into EK
https://honda-tech.com/zerothread?id=1225538- RSX Seats with Custom Brackets into EK
https://honda-tech.com/zerothread?id=766603- 92-96 Prelude Seats into EK
https://honda-tech.com/zerothread?id=577769- DIY Seat Brackets

ventturei27

should look and feel nice, im getting a hook up on some s2000 seat so, ill be in the same boat in a bit

vtecnologist

yeah i checked all of those
but i didnt see anything about ep3 seats into an eg

vtecnologist

well i took the entire seat apart and i cant swap the pan and the hinge like with the s2000
so im going to drill out the rivets on the seat tabs and grind off the welds and fab some tabs to mount on the stock rails
hope it all works