ej2redcoupe

hey i been looking around for info on putting these seats in a eg. but cant seem to find a good how to thread with pictures can some one please help out a little

420eg95

I have the same problem, ep3 seats and a 95 coupe. You can cut and weld a custom brackett/plate to get all the bolt holes to line up but its rather difficult without the proper tools, and can be unsafe in an accident. You can't change the rails, and you can't change the bucket either, welding and fab work is the only way, and if you don't have a mig welder you will need to take it somewhere to get it done.

There is a old post on here were someone did a write up and took pics of the custom work he did. not sure if still around, I looked but couldn't find it.

jdmh22eg2

well i just picked up ep3's other day for my hatch and they were on eg/dc rails with out cutting or welding idk how he did it but i will see if i can find anything in next day or two

Ruben19

i had ep3 seat in my em1.
liked them but they seat kinda high. just picked up some 06+ civic si seats.
all u gotta do for the ep3 to fit is to make some front rail brackets.

jdmh22eg2

^^ idk the ones i got are on STOCK eg rails no brackets made on them

Ruben19

mine were on stock ep3 rails