evilho75

92eg vtech....I. just finish doing a wire tuck on my civic, and move battery to back of the car and move fuse box inside the cabin,now it won't start, no lights, dahsboard no lights.
I check with metter and have voltage on the starter, fusebox, alternator, but no power anyware??????
I ran a 2g wire from hatch to starter
From starter 10g to fuse box
And reconect alternator to fusebox.
And 10g from fusebox to ground.

Anybod! Please help??????

Former User

Check continuity to body ground from the battery ground post.

Sp00n2nr

Do you have a good connection between the starter and the fuse box? Should be a thick white wire if I'm not mistaken.

evilho75

I have a 10g wire btween starter and fuse box, is the wire coming from alternator conects to + or - on fuse box?

Sp00n2nr

I'm almost sure it's the positive. On the fuse box you will have 2 thick wires going into it which bolt down. Closest to the fuses is the wire that goes to the positive side of the battery and then furthest away from the fuses is your alt wire. I would also check the 80 amp fuse to see if it's still good. Hope that helps

evilho75

thanks for all the help,,i had inverted wires my friend come tru and help out

grumblemarc

iTrader: (4)

Which wires? I'm going to assume we aren't talking about the two battery wires.