supaman111

hi, i am going for more power from my eg6, it already has a b16 but i want more. I was thinking of Boost or a b18c6 or c5, looking for about 200-220 hp at fly.

Any suggestions on setups would be helpful. It will be driven on a daily basis and it will be driven hard 70-80% of the time

i would like to hit a 14.5 qtr mile with a stripped out car, at the mo it is 15.3

unknown0001

boost the b16

a b18c5 is around 180ish to the wheels

c1civic

id say since your goals are not extreme, i would just boost what u have. In your case i would look at the greddy kit, it wont produce the highest numbers, but it will will meet/break alll your goals.

AbitAvenger

homemadeturbo.com

make your own kit, cheaper and you learn more, spend what you save on tuning

supaman111

would a b18c6 or c5 give me a 14.5 qtr mile time? and what can i expect from greddy and what from drag gen 3? my cars done 130,000 miles would i need to do anything internally for boost??

sam

Luserkid

You could/should get a 14.5 1/4th time right now with a B16. Since you cant deside between boost and swap go with the outside choice and squeeze.

supaman111

I tried like a hundred times man, my car is in good condition so no probs with that, it was a cold day and anyone with a b16 could not break 14's, the DC2R's were hitting 14.8 and one hit a 14.5 but had been fettled with

I need to be faster then a DC5R !!!!!! without nitrous

sam

Luserkid

Whats your alttitude (sp?)? If your above sealevel you would have to do some math to find out your actual speed. Type Rs should be doing high 13s low 14s.

And why do you need to be faster then a type R? Also you could put so much money and power into your car but if you dont know how to drive it then you wont be going anywhere, learn to drive/drag/launch better then upgrade more.

supaman111

your username says everything about you!!!!

DFW

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by supaman111 &raquo;</TD></TR><TR><TD CLASS="quote">your username says everything about you!!!!</TD></TR></TABLE>

Teggys1ClnDA

I say we minus some points from this guy for his bad attitude

Luserkid

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by supaman111 &raquo;</TD></TR><TR><TD CLASS="quote">your username says everything about you!!!!</TD></TR></TABLE>

Teggys1ClnDA

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid &raquo;</TD></TR><TR><TD CLASS="quote">




</TD></TR></TABLE>
hahaha
that's great

JohnnyWash1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by supaman111 &raquo;</TD></TR><TR><TD CLASS="quote">your username says everything about you!!!!</TD></TR></TABLE>

Oh damn, he was trying to help. Don't be such an idiot. You asked an illegal question and you smack of greenhorn n00b. Quit with the insolent behavior and have some respect.

supaman111

people in this forum need to stop crying, it's making me uncomfortable

swifty4u

Yes, a b18canything will hit mid 14's in your car if you can drive.

supaman111

i am thinking turbo, but my heart is sayin b18c6, think i might just go buy the b18 before someone else does.

EG_intheworks

A B16 in a hatch should be hittin mid-high 14's with CAI and exhaust. i would say spray the B16. A NO2 kit + remote bottle opener + bottle warmer will cost less than a turbo and you meet meet or excede your time goals.

whats a b18c6?

swifty4u

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EG_intheworks &raquo;</TD></TR><TR><TD CLASS="quote">
whats a b18c6?</TD></TR></TABLE>

Pretty sure thats an Euro type r motor..correct?

supaman111

i think you guys get b18c5 which has more hp, we get b18c6 motor its got 190hp.

i am looking for power without nos, you dnt wona know how much it cost to get Nos bottle filled round here

lone

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by supaman111 &raquo;</TD></TR><TR><TD CLASS="quote">i am looking for power without nos, you dnt wona know how much it cost to get Nos bottle filled round here </TD></TR></TABLE>

then just boost it. that will probably be your best bet

g0ldywang

Go k-series! Thats where the real fun is at!

supaman111

now seriously i was thinking of a k series as a breakers yard has 2 of em, a jdm k20 and a uk k20, but the costs of putting it in i thought would be too high.

Any1 know what is involved? b18 just drops in on the usual mounts, the k series has to be mounted backwards compared to the b series so i dont know what i would have to do to get it in.

ARRGHHHH which one?????

eg64u

220hp to the fly will easily exceed your goals. If you ar planning to do a swap and just go for straight beating on it every day. then i would go with type RRRRRR. hahha. but if you decide not to beat on it to much. i would go with turbo on your b16a with decent boost , but thats as long as you dont rip it all the time like your saying you will. So all in all for what you are wanting the type r will get your hatch/coupe in low 13's all motor with intake/header/exhaust/chip/drag radials. Guranteed if you are a good driver. Seen/done it many times.

supaman111

cheers for the advice, i will go and buy the engine this week, hopefully he has still got it, i think turbo will not handle my punishment on a day to day basis and fuel costs would be high aswell. Genuine Honda parts sound good to me!!

sam