rdwaldo

I am running h/i/e stage 2 clutch and flywheel and a crank pulley on an em1. Anybody with a similar setup tell me what they run the1/4 mile in

fmrprojects

15.9

black_EM1

11's.

Go to the ******* track.

EM1OwnerSi

i Ran a 15.6 with a header,cat, and air intake

BuiltforSin

hopefully more than 15.9

I ran 15.9 in SOHC I/H/E

I say mid 15's..

nighttrain33

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fmrprojects &raquo;</TD></TR><TR><TD CLASS="quote">15.9</TD></TR></TABLE>

According to any car magazine your car should run faster than that STOCK. Any EM1 with bolt ons should be in the low-mid 15's depending on set-up.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rdwaldo &raquo;</TD></TR><TR><TD CLASS="quote">I am running h/i/e stage 2 clutch and flywheel and a crank pulley on an em1. Anybody with a similar setup tell me what they run the1/4 mile in </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bauley Civic &raquo;</TD></TR><TR><TD CLASS="quote">Things that won't be tolerated
&gt; Bench racing</TD></TR></TABLE>

-Shane

iBear

iTrader: (1)

EM1's are slow.

MassScene

i went 15.4 with just a catback in my friends em1 with stock clutch and everything.

-Trinitron-

My personal best on the motor with street tires was 15.5 in the 1/4 and a 9.5 in the 1/8. I know I could have been faster though, because my 1/8 mile time on the 15.5 was 10.2...so I would say a well driven EM1 could go 15 flat, if not hi 14's. Especially on slicks.

EGwhat!!!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black_EM1 &raquo;</TD></TR><TR><TD CLASS="quote">11's.

Go to the ******* track.</TD></TR></TABLE>

best advice yet and i would love to see you guys run a 14 on an basically stock em1

rdwaldo

Bump

nighttrain33

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rdwaldo &raquo;</TD></TR><TR><TD CLASS="quote">Bump</TD></TR></TABLE>

No bump for you. No bench racing either.

-Shane

GSRwBOOST

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mugenej8power &raquo;</TD></TR><TR><TD CLASS="quote">hopefully more than 15.9

I ran 15.9 in SOHC I/H/E

I say mid 15's..</TD></TR></TABLE>


Holy ******* slow batman!

cambopheonix56

Get rid of that crank pulley before you damage your motor.

Archidictus

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GSRwBOOST &raquo;</TD></TR><TR><TD CLASS="quote">Holy ******* slow batman!</TD></TR></TABLE>

Did you have to hide all those mods from your woman or did she finally cave to your hobby?

rmcdaniels

EM1's are slow, they need boost:

nighttrain33

BTW, <FONT COLOR="blue">This</FONT> should answer your question about times.

-Shane

cambopheonix56

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rmcdaniels &raquo;</TD></TR><TR><TD CLASS="quote">EM1's are slow, they need boost:

</TD></TR></TABLE>

Whats your set-up?

dohcVTECeg2

this thread is stooopid