cubanSiR

hey guys...sorry for bugging you...im outside right now trying to do my headlight harness wire tuck on my EK... i ran into a problem. I actually thought that each side had its own harness and can easily be run through the fender...but come to find out that its acually ONE big harness that runs from behind the drivers side shock tower...around the front connecting the horn and Coolant temp sensor and it keeps going connecting beehind the passenger side shock tower...lol...how am i supposed to tuck that if its just one long harness..

prettylew

cut and extend wires, solder, and tuck, if it was easy everyone would do it.

cubanSiR

but ive read soooo many times...that people do their wire tucks WITHOUT cutting or extending ANY wires...

prettylew

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cubanSiR &raquo;</TD></TR><TR><TD CLASS="quote">
but ive read soooo many times...that people do their wire tucks WITHOUT cutting or extending ANY wires... </TD></TR></TABLE>

where? if thats the case the tuck must look like ****., i dont see how thats possible. even on my EF i had to cut and extend.

wire tucks arent that easy. its a tedious and time consuming task.

Ryan97

no need to cut and extend.research.

EJ8chu

iTrader: (2)

the only thing i had to cut was some electrical tape wrapped around the harnesses

silverdcteg

i didnt cut wires but i have an eg

FlatBlkEk

I had to cut and extend wires on my ek. No big deal. I wish my engine harness was as easy as the headlight tuck.

Sp00nFed EM1

This is true. (looking at a rats nest of wires in my garage waiting to be finished )

96NBPek

I've been wanting to do this but I'm too chicken.