EK Hatch DX Rims Questions
06-02-2016, 11:37 PM
#1
Trial User
Thread Starter
Join Date: Jun 2016
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
EK Hatch DX Rims Questions
Hello, I'm a real newbie when it comes to modding, just started to mod on my EK DX 1996 Hatchback.
So I'm planning to get KONIG rims, specifically these ones:
KONIG® ROLLER Wheels - Silver with Machined Face Rims
They are: 16" x 7.5", +35 Offset, 4x100 Bolt Pattern, 73.1mm Hub.
Also, I'm lowering my car using Eibach sportline springs so it'd be about 1.8inches max lowered.
I wanted, to know with the wheel specs, would these wheels work/fit on my car, or nah. And also, would I need to roll the fenders for these wheels.
And I'm getting 205/50/16 tires by the way. Let me know if the rims will be able to work with these tires and fit on my car, also if I would need to fender roll based on my suspension setup. Thanks, and sorry if it's a stupid question, again, I'm a newbie. Thanks!
So I'm planning to get KONIG rims, specifically these ones:
KONIG® ROLLER Wheels - Silver with Machined Face Rims
They are: 16" x 7.5", +35 Offset, 4x100 Bolt Pattern, 73.1mm Hub.
Also, I'm lowering my car using Eibach sportline springs so it'd be about 1.8inches max lowered.
I wanted, to know with the wheel specs, would these wheels work/fit on my car, or nah. And also, would I need to roll the fenders for these wheels.
And I'm getting 205/50/16 tires by the way. Let me know if the rims will be able to work with these tires and fit on my car, also if I would need to fender roll based on my suspension setup. Thanks, and sorry if it's a stupid question, again, I'm a newbie. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post