Notices
Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

Ek with h22a

Thread Tools
 
Search this Thread
 
Old 07-02-2009, 06:59 PM
  #1  
Thread Starter
 
sgallant44's Avatar
 
Join Date: Jul 2009
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Ek with h22a

Hey guys im new here but i have a 2000 ek with a jdm h22a and im having problems with my idle. When cold its at 2000 rpm but when warm its 1500. Its throwing the cel coming up as code 7 the throttle positon sensor and i replaced it but it stills idles high and its still throwing the same code.... and yes i reset my ecu. I have a cracked gasket on my throttle body would this cause the problems?


Also when driving and coming to a stop my car will sometimes cut out and its hard to start after.
Old 07-02-2009, 07:22 PM
  #2  
I'm not Rick!
 
rick_rabies's Avatar
 
Join Date: Feb 2009
Location: under a prayer shawl
Posts: 6,940
Likes: 0
Received 4 Likes on 4 Posts
Default Re: Ek with h22a

yes ur tps reads stuff like bad gaskets
Old 07-02-2009, 07:45 PM
  #3  
Honda-Tech Member
 
eruktion's Avatar
 
Join Date: Jul 2009
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Ek with h22a

you have ac ontop that car?
Old 07-02-2009, 08:24 PM
  #4  
Honda-Tech Member
 
Hondatherdm's Avatar
 
Join Date: Jun 2009
Location: CCCP
Posts: 277
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Ek with h22a

Replace the gasket and reset the TPS
Old 07-03-2009, 05:06 AM
  #5  
Thread Starter
 
sgallant44's Avatar
 
Join Date: Jul 2009
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Ek with h22a

Alright thanks guys and no there is no air conditioning or no power stearing.
Old 07-03-2009, 06:43 AM
  #6  
Honda-Tech Member
 
rpared01's Avatar
 
Join Date: Feb 2007
Location: LA, Cali
Posts: 622
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Ek with h22a

what kind of ecu are you running ? p13, p28, p30 ? does it have a chip in it ? have you tried running another ecu ?
Old 07-03-2009, 09:40 AM
  #7  
Thread Starter
 
sgallant44's Avatar
 
Join Date: Jul 2009
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Ek with h22a

p13 ecu no chip and no i didnt try running another ecu. Its throwing codes 3,12,7,20 now :/
Old 07-03-2009, 09:47 AM
  #8  
Honda-Tech Member
 
Former User's Avatar
 
Join Date: Feb 2008
Posts: 45,219
Likes: 0
Received 44 Likes on 22 Posts
Default Re: Ek with h22a

Originally Posted by sgallant44
p13 ecu no chip and no i didnt try running another ecu. Its throwing codes 3,12,7,20 now :/

Sounds like you have the correct ECU but possibly the wrong engine wire harnesses.
Old 07-03-2009, 10:42 AM
  #9  
Junior Member
 
da9_ej1's Avatar
 
Join Date: Jul 2009
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Ek with h22a

my accord did this take the iacv off and check the plunger if its pushed all the way out it will idle high and sometimes fluctuate if so take the plunger out use thread lock and screw plunger back in all the way its a ghetto fix but its worth not paying $250 for a brand new one
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
h22hatch88
Honda Civic / Del Sol (1992 - 2000)
1
02-27-2008 01:35 AM
erikiksaz1
All Motor / Naturally Aspirated
3
01-17-2007 10:39 AM
NY93CivicEx
Honda Civic / Del Sol (1992 - 2000)
5
06-11-2005 11:53 AM



Quick Reply: Ek with h22a



All times are GMT -8. The time now is 12:00 AM.