EK and EG control arms interchangeable?
08-19-2003, 12:31 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: Santa Clara, CA
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
EK and EG control arms interchangeable?
I'm a trial user, so i might not be able to respond to posts.
In any case, i'm curious if the EG and EK upper control arms are interchangeable? From what i can tell, the main difference is that the bushings are in different places. Meaning the EG has the bushings in the pivot arm, not the control arm, while the EK has the bushings in the control arm and not the pivot arm.
If this is the case, could i just rip off the whole assembly from an EK and bolt it onto my EK?
Also, is the steering rack interchangeable from EK to EG?
In any case, i'm curious if the EG and EK upper control arms are interchangeable? From what i can tell, the main difference is that the bushings are in different places. Meaning the EG has the bushings in the pivot arm, not the control arm, while the EK has the bushings in the control arm and not the pivot arm.
If this is the case, could i just rip off the whole assembly from an EK and bolt it onto my EK?
Also, is the steering rack interchangeable from EK to EG?
08-19-2003, 01:21 PM
#2
Honda-Tech Member
Join Date: Nov 2002
Location: United States
Posts: 1,001
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK and EG control arms interchangeable? (R6Elmo)
The EG and EK upper control arms are not interchangeable. The EG and the 94-01 Integra upper control arms are interchangeable.
I don't know anything about the steering rack, so somebody else would need to answer that question.
I don't know anything about the steering rack, so somebody else would need to answer that question.
Thread
Thread Starter
Forum
Replies
Last Post
Short Round
Honda Civic / Del Sol (1992 - 2000)
2
12-17-2008 07:29 AM
EG2Driver
Honda Civic / Del Sol (1992 - 2000)
1
07-31-2008 09:30 AM
