EK/B18B1 swap - Can't find service connector. How do I pull CEL codes?
01-21-2012, 04:05 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: Louisville, KY
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
EK/B18B1 swap - Can't find service connector. How do I pull CEL codes?
I have a B18B1 in my EK, but whoever did the swap opted for an OBD1 ecu and I can't read the CEL now. I heard there's a trick to it, but I can't find out how. Any help would be appreciated.
01-22-2012, 05:46 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: Louisville, KY
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Re: CEL question..
I read that thread but I don't see that connector. Here's a picture of how mine looks. The p Eff son I bought The car from did all this.
01-22-2012, 04:44 PM
#7
Re: EK/B18B1 swap - Can't find service connector. How do I pull CEL codes?
What year civic?
The service connector has a brown wire and a black wire. Look for those two wires.
The service connector has a brown wire and a black wire. Look for those two wires.
Trending Topics
01-22-2012, 05:24 PM
#10
Re: EK/B18B1 swap - Can't find service connector. How do I pull CEL codes?
The brown wire of the service connector pins to terminal C7 of blue OBD2a ECU connector C plugged into the conversion harness. If you ground that brown wire, the CEL will blink the codes.
Last edited by Former User; 01-22-2012 at 05:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Tw1n Turb0 Z
Honda Civic / Del Sol (1992 - 2000)
5
02-11-2007 11:08 PM
Tw1n Turb0 Z
Honda CRX / EF Civic (1988 - 1991)
2
10-09-2006 06:18 PM
Tryk
Honda Civic / Del Sol (1992 - 2000)
3
09-13-2004 04:44 PM
