Chong

First of all, I DID search, but I'm just too lazy to go thru the 1000 topics on brake swaps to find out EXACTLY what I need to know. So, if you have nothing to contribute please don't post here.

Ok... someone told me that a Local Junkyard has a new teg w/ brakes and all and I'll like to go and scoop them up first thing in the morning tomorrow. I have a few questions first thou.

1) I have Omnipower Streets, Robear Racing front upper control arm, and megan racing rear LCAs, Will these parts work if I get the dc2 brakes (front and rear)?

2) What parts EXACTLY do I need to scrap from the dc2 to make it work with my eh2? From my readings in another thread you need:

Brake booster
master cylinder and proportioning valve
front spindles
upper control arms (But i have aftermarket ones, will those work?)
caliper
rotors
lines
rear trailing arms
lines
ebrake cables
rotors
caliper

What else would I need? Or is this all?

hatchi

complete front spindles/knuckles, brake lines, ebrake cables, rear trailing arms, you can reuse your aftermarket upper control arm. prop valve, brake booster w/master cylinder