EG rear engine bracket problem
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: Hilo, Hawaii
Posts: 4,136
Likes: 0
Received 0 Likes
on
0 Posts
EG rear engine bracket problem
First off, I am more familiar with EF's than EG's, so please bear with me. I'm having a problem getting my motor bolted up to the chassis. The car is a 94 four-door that I just picked up, and I'm putting in a D15B7 (going for gas mileage). Car had a B16 in it (previous owner removed the motor before I got the car). Now the problem. I have both the driver's side and passenger's side mounts bolted up, but the rear bracket is too short. It is about 2"~3" from lining up with the rear mount. I'm kinda stumped on this. I've even tried using an EK rear bracket thinking it might be different. I'm not real sure what to do right now, I've tried searching for this, but couldn't come up with anything. The only thing that I can think of is that maybe the crossmember was changed with something else. Not too sure, because the car does have a manual steering rack as well. Any help or insight would be greatly appreciated. Maybe I just need to drop a B-series in LOL! TIA.
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: Hilo, Hawaii
Posts: 4,136
Likes: 0
Received 0 Likes
on
0 Posts
Re: EG rear engine bracket problem (idriveadelsol7)
I have a bracket on there now, I just don't know what it's off of. I'm thinking (after seeing a pic of an EG rear bracket) that I have an EK one on there now. The EG one appears to be a bit longer than the EK one. I feel like such a noob.
Thread
Thread Starter
Forum
Replies
Last Post
corollagts33
Hybrid / Engine Swaps
2
12-07-2005 10:37 PM
GarageTech
Hybrid / Engine Swaps
10
03-11-2005 09:43 PM