kevbo82

i must not be putting the right words into the search because i cant find anything. Can you put a D16Z6 into an EK hatch? and also use the EK's 5 speed tranny? i just built a D16Z6 and have turbo and intercooler and all for it, now i found a good deal on a 98 hatch, is this doable? i know nothing of the EK's so far in my life, but it seems like they're both D series motor's/trans. any work involved in this? as far as changing mounts, ecu's, etc?
Thanks in advance

D16Z6_turbo

It'll all bolt in. Just use the driver side motor mount for the EK's. All the D-series are interchangeable.

oxSLEEPERxo

what about the D16Z6 wiring harness? is it plug and play on teh harness on the shock tower?

sockvtec

you should be able to just drop it in

kaiba

The d166z6 is a obd1, right. And isn't a 96 + civic obd2. So don't you'll have to convert it or something.

oxSLEEPERxo

i know that it will need the obd2 to obd 1 conversion harness, so the p28 can be used

RedEj8

I thought somethings on the engine wiring harness was different between obd1 and obd2? Maybe im wrong..

kevbo82

yeah im pretty sure the distributer changes from obd1 to 2. o2's are still 4 wire though right? ehhh doesnt matter, deal fell through, found a new one, sticking with the EG