crxste

Hey guys I just dropped a GSR motor into my EG hatch, it's running EK9 cams and valve train, cam gears, Short Ram Intake with HKS super Power Flow, DC 4-1 Header, Test Pipe, 2.25" ID exhaust.

JDM ITR Tranny with AP Organic Clutch and a Fidanza Billet Fly wheel

The car is pretty stripped with just front seats carpet, dash and door cars, no stereo.

I'm running on Volk CE28's 16" dia with street tyres .

I'm hoping to hit the 14's waddya think?

patdemps

First off, its tough to tell when we don't know exactly how much power that car is pushing and how good of a driver you are.

But honestly, you should EASILY be into the 14's with a B18C1 in a hatch if it was in stock form. Yours is modified and you have a great tranny setup, so I see some low to mid 14's with that car. Thats just guessing though.

A stock b18c1 pulls around 145-150whp stock. We'll just throw out for ***** 10whp added with your mods (because I don't know much about those cams you got in there, and you never mentioned anything about a tuning device so im taking it that its untuned, which sucks, but hey its your car)......now with any extra power on top of a stock c1 you should easily pull 14's with ease, especially with that ITR tranny.

KLeSe

14s no doubt! Had a cx with GSR motor and only intake & exaust. Best run 15.1 at Carlsbad raceway. Basically, was runing between low to mid 15s. In the prior Crx with stock b16a would run mid 14s all day. Put on some slicks and go to the track, you might be surprise. 13s?

vtec69

id say low 14s high 13s

Andres-eh2

https://honda-tech.com/zerothread?id=858510

ej1 pilot

whats with all the slow gsr's? my brother ran 14.8s in his b16 rex with just i/e and i see tons of b16 hatches run 14s, guess its the driver or elevation

HitEm'Up

U should get low 14s to high 13s

5w20

<U>weight </U>

14.8 @ 93 crank pully and 2.5 in trust catback otherwise stock gsr

2460 lb Si hatch w/no driver
2650 w/driver

basically just an integra gsr because of the weight


Modified by 5w20 at 3:33 PM 9/11/2004

yaya

a friend of mine had a similar setup....93 vx gsr engine,stock tranny, no lsd, itr cams, milled head (i dont know how much) skunk2 im.....he ran a best of 13.9 with street tires, and 13.9 with drag radials.....go figure.....his car wasnt stripped at all... had tools and **** in the back.

yaya

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 5w20 &raquo;</TD></TR><TR><TD CLASS="quote"><U>weight </U>

14.8 @ 93 crank pully and 2.5 in trust catback otherwise stock gsr

2460 lb Si hatch w/no driver
2650 w/driver

basically just an integra gsr because of the weight


Modified by 5w20 at 3:33 PM 9/11/2004</TD></TR></TABLE>

huh? how much does a gsr weigh?

SiR831

last year i hit a 13.5 with a stock jdm gsr in an EG, slicks, generic intake, and stock open header.

ek9800

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiR831 &raquo;</TD></TR><TR><TD CLASS="quote">last year i hit a 13.5 with a stock jdm gsr in an EG, slicks, generic intake, and stock open header. </TD></TR></TABLE>

damn!! thats good

5w20

roughly 2600-2750 with driver

What does the AVERAGE hatch weigh 2200-2350 with driver correct?

crxste

Forgot to mention I'm runnig a Apexi V-AFC to tune along with cam gears and a B&M FPR.

Mike_C

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 5w20 &raquo;</TD></TR><TR><TD CLASS="quote">roughly 2600-2750 with driver

What does the AVERAGE hatch weigh 2200-2350 with driver correct? </TD></TR></TABLE>

2200-2400 w/ driver depending on prep.

spooncivic1

what would a completely stock GSR swap with just intake and stock open header in EH2

Mike_C

what if what if what if what if... GO TRY!

christ, it mostly depends on driver. high 13s to low 15s.

WHY DO I BOTHER VISITING THE EG FORUM ANYMORE!?!?!

daver

I'm not sure which model of hatch you have, but with that tranny and whatever upgraded cams those are, and proper tuning, you should be able to beat my time no matter what. check sig...

B18C5-EH2

I'd say about:

search.36@there'stonsofinfoalreadyonthis
there was a link to the official DOHC Civic 1/4 mile times topic within this one - check it out.