EG+B18c=Drag times?
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2001
Location: or
Posts: 2,195
Likes: 0
Received 0 Likes
on
0 Posts
EG+B18c=Drag times?
what would I expect im kinda leaning towards this engine and want to know if I should wear a helmet when I go to the track... he he dont want to get kick out you know.
#2
Re: EG+B18c=Drag times? (Redracinghart)
check out our eg with a STOCK gsr motor.
http://www.velascoracing.com
It's not streetable (fiberglass doors). But its quick!
http://www.velascoracing.com
It's not streetable (fiberglass doors). But its quick!
#3
Honda-Tech Member
Join Date: Nov 2001
Location: CALIFORNIA
Posts: 15,366
Likes: 0
Received 0 Likes
on
0 Posts
Re: EG+B18c=Drag times? (Redracinghart)
well i had a 1995 coupe with a stock b18c1 beast in it. it was stock with the exception of a Field's vtec controller, AEM intake for a 99 si, and an exhaust dump(Y-pipe) and i consistantly hit 13.7-13.8. Oh yeah I had a ACT 6 puck in there. Let me remind you that this is in a 1995 DX coupe, full interior and on Nitto 555R.
#6
Re: EG+B18c=Drag times?
I got a b18c1 in my hatch adn i have only been to the track a few times since i only drive it to beat around in, since i have school an all. The fastest i have ever ran was a 14.28 at some odd miles an hour. That was with just a basically stock gsr in a hatch and i had the backseats out too, plus it had exhaust and intake and header and thats it.
Trending Topics
#8
Re: EG+B18c=Drag times? (SpeedracerS4)
LSD and $100-200 slicks will go a long way in the 1/4mile (not to mention braking)
Fairly cheap investment for the benefits that come with it... if thats your thing
Fairly cheap investment for the benefits that come with it... if thats your thing
#9
Honda-Tech Member
Re: EG+B18c=Drag times? (HighTachB18)
I'd say high 13's is about right. I raced an EK with a B18C + bolt-ons and just barley edged it out, raced an EJ later with the same B18C + bolt-ons, beat him by a larger margin, but he's got a heavier coupe. Only hybrid EG I race is a CX w/ a JDM B16A (SiR II 170ps) with intake and exahust and I have a real tough time with him through 3rd before I can distance myself. With a set of drag radials and an LSD, lower-mid 13's all day in a B18C1 powered EG
#10
Honda-Tech Member
Thread Starter
Join Date: Aug 2001
Location: or
Posts: 2,195
Likes: 0
Received 0 Likes
on
0 Posts
Re: EG+B18c=Drag times? (VTC_CiViC)
me and a buddy are going to invest in slicks and wheels to share at the track. I also am going to get LSD with the engine. These #'s are lookin great, and I might have to invest in a helmet to not get kicked off the track.
#13
Honda-Tech Member
Re: EG+B18c=Drag times? (RK)
I'd love to have high 13s...I was thinking mid 14s when I get my eg hybrid set up.
-Rod
-Rod
Thread
Thread Starter
Forum
Replies
Last Post
bigmac1204
Drag Racing
7
10-22-2012 07:53 PM