92egjbest

i just pulled out the d15 from my hatch and everone i talked to said i could reuse the front 2 torque mounts from the d15 i just had to change the side and rear trans mount but the front one on the pass side i can only get 3 of the 5 bolts in (2 into the trans 1 into the body) and on the drivers side i can only get 2 of the 6 in ( 1 in the engine 1 in the body). do i need to chane the front mounts to diff ones?

:::SIRll_EJ1:::

I swapped out my z6 for a b16a2 and the only mounts im using are rear, pass, and drivers.

and NO problems.