Eg/b16a sir-ii swap - cel for TPS and IAT
#1
Eg/b16a sir-ii swap - cel for TPS and IAT
Can someone post a picture of there engine harness and the sensor and color wire. I'm getting cel for TPS and IAT and It looks to me that try are pulled in the right position and I still have one Three wire connecter and one two plug connecter unplugged. It idles at 1.8k rpm and I changed the sensors also. So I'm lost if someone can post a picture I would be more then happy or a link that can help me.
Think it's running in limp mode I've been told because it won't let me pass 6k rpm. It has a b16a sir-ii in it. Cracks vtec fine at 4k but after that redlines at 6k can someone please give me some feed back.
Think it's running in limp mode I've been told because it won't let me pass 6k rpm. It has a b16a sir-ii in it. Cracks vtec fine at 4k but after that redlines at 6k can someone please give me some feed back.
Thread
Thread Starter
Forum
Replies
Last Post
streethondar
Honda Civic / Del Sol (1992 - 2000)
1
09-14-2012 12:50 PM
b16_madman
Hybrid / Engine Swaps
1
07-03-2003 01:05 AM