chunkybs

my buddy is parting out his EF hatch and he's letting me have the seats, how can i make them fit into my '94 hatch?

these are the seats, i put them in but the holes don't line up, what is the easiest way to make them fit?

EeeJayEight

there was a write up a while ago...

https://honda-tech.com/zerosearch

chunkybs

got a link to the thread? i tried to search but cannot find it since you can't search for "EF Si seats into a EG" because EF, EG, Si, and A all don't search and "seats into" brings up like 200 things that have nothing to do with the swap

Sleepy_Red_hatch

swap seatpans man, common now, look a little. its the same thing for s2000 seats into civics

JDM DERF

true story. not that big deal at all. and they will look nice in your hatch

JDM knowledge

iTrader: (1)

switch the rails from your old EH seats. Once you look at it, its common sense.

chunkybs

after tearing into them and looking it over, i'm just going to tap a couple new holes so it will fit. much easier since the seat pan swapping idea was a pain in the ***.

chunkybs

has this swap been done before? is there a write up anyplace cause i can't find one