ECU and searching idle
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2008
Location: Milwaukee, WI, USA
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
ECU and searching idle
Hey everyone,
I'm having a slight issue after swapping a D15 for a D16. I swapped the p06 with an unchipped p28. The motor runs just fine with the p06 in (albeit no vtec). Though, when I plug the p28 in, the motor idles up and down and drives poorly. Also, it throws a CEL of 14. As far as my research tells me, this indicates a problem with the IAC.
Anyone have any experience or suggestions for this?
note: with the p06 there are no CEL codes.
I'm having a slight issue after swapping a D15 for a D16. I swapped the p06 with an unchipped p28. The motor runs just fine with the p06 in (albeit no vtec). Though, when I plug the p28 in, the motor idles up and down and drives poorly. Also, it throws a CEL of 14. As far as my research tells me, this indicates a problem with the IAC.
Anyone have any experience or suggestions for this?
note: with the p06 there are no CEL codes.
Thread
Thread Starter
Forum
Replies
Last Post
willyboyK20
Honda Civic / Del Sol (1992 - 2000)
7
04-11-2005 04:43 PM