which ecu chip
#2
Honda-Tech Member
Join Date: Oct 2002
Location: Japan, JP, Japan
Posts: 67,290
Likes: 0
Received 0 Likes
on
0 Posts
Re: which ecu chip (D124gOn)
Whay dont you want a rev limiter? So you can over rev and blow your engine?
If all you have is i/h/e you dont need to rechipped the ecu with no rev limiter
If all you have is i/h/e you dont need to rechipped the ecu with no rev limiter
#4
Thread Starter
Join Date: Oct 2002
Location: lodi, CA, USA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Re: which ecu chip (D124gOn)
what if i put a p2t ecu from a 99-00 si
that would take off the 121 mark????
but would it mess my engine up?
im a newb and need help plz
that would take off the 121 mark????
but would it mess my engine up?
im a newb and need help plz
#5
Honda-Tech Member
Join Date: Oct 2002
Location: Tampa
Posts: 5,401
Likes: 0
Received 0 Likes
on
0 Posts
Re: which ecu chip (D124gOn)
thats not the rev limiter.... its prolly the speed limiter....... dont bother with that man.... civics arent necessarily meant to hit 200mph.... hehe
Trending Topics
#8
Re: which ecu chip (D124gOn)
true !
but i dont want my car to max at 121 either when i hit makes me cry almost
hahah
but i dont want my car to max at 121 either when i hit makes me cry almost
hahah
#10
Honda-Tech Member
Re: which ecu chip (D124gOn)
why the **** do you want to go over 121 mph?
i garuntee you arent pulling that in a 1/4 mile
and im willing to bet money this isnt on a racetrak.
if your doing this on the street/highway, i hope you kill yourself before you kill someone else.
i garuntee you arent pulling that in a 1/4 mile
and im willing to bet money this isnt on a racetrak.
if your doing this on the street/highway, i hope you kill yourself before you kill someone else.
#13
Honda-Tech Member
Join Date: Aug 2002
Location: Northern Va
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Re: which ecu chip (charjacq)
hey im trying to chip my car...I drive a 97' GSR with few mods..im about to get a manifold and a vtec controller, but i wuld like to get chipped also. I just dont know which chip to go with.I dont know the specs and which chip works best with which motor. Could you guys help me out with some advice. Im planning on going all motor, so which ever would work best. And would i HAVE to convert my ecu-obd1? If so that would only cost $25? well tell me what i would need to get in order to chip my ride...thanx...
<RockDAwg_GSR@hotmail.com>
AIM-RockDAwgGSR
<RockDAwg_GSR@hotmail.com>
AIM-RockDAwgGSR