eagle rods notching out block for clearance?? help !!! help!!!
#1
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: saco, maine
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
eagle rods notching out block for clearance?? help !!! help!!!
i have a 1995 d16 and bought eagle rods, and am still using stock crank. the rods hit on the bottom of the cylinder walls. i called eagle and they told me that this is a common thing. if i would have know that to begin with i would have gone with something else. ..my mechanic at honda(who is doing my work for me there) is hesitant on grinding it down. so.. my question is, will i have to do this with any other brand of rods? any other suggested brands that will fit right? i would dish out the money for them if need be.... it just seems like a hassle... I NEED HIM TO GET IT DONE BEFORE WINTER SO PLEASE GIVE ME ANY SUGGESTIONS THAT YOU GUYS MIGHT HAVE
Rick
Rick
#2
HT White Ops
Re: eagle rods notching out block for clearance?? help !!! help!!! (redciv)
...my question is, will i have to do this with any other brand of rods? any other suggested brands that will fit right...
Thread
Thread Starter
Forum
Replies
Last Post
brusk13
Honda CRX / EF Civic (1988 - 1991)
4
06-08-2005 08:36 PM