EFREN

Ok so i am currently putting together my little project.. Its 97 dx sedan.. So i currently installed my rear disk brakes which came off an em1 so i know i have the correct cables. But when i engage the lever the left side is engaging but i can still spin the the hub. I already have tried adjusting. And nothing changed.

Also this little piece is pulling crooked left side being higher..

Former User

The star adjuster may be adjusted differently on one side than the other, or the pads/drums are worn differently.

1996CivicEXEJ8

^^^x2

EFREN

That star adjuster would be on the caliper?.. I just put on brand new pads.

Former User

Never mind about the star adjuster. I forgot you had rear disc brakes.

These may help:

EFREN

I just took it that far up and did nothing for it..

EFREN

Mmmmm i did a brake line tuck.. But been having problems bleeding the system.. I cant start the engine..(harness is not ready) to be able to do the self adjusting thing. Could that be a possibility?

EFREN

Bump... Anymore suggestions?

Former User

Get the engine running first so that you can do the self adjust. Then go from there.