nY's FiNeSt

Wassup guys, i have a 92 cx hatch and i just recently put a gsr rear disc conversion.

Now when i take turns very hard my ebrake light will pop on until i'm out of the turn, but my ebrake never goes up. So i'm wondering is it something with the connection or what? Please help me out....


thanks, john

Draggin99Si

I would say it's due to a faulty parking brake switch. Mine acts all screwy also.

nY's FiNeSt

anyone else?

pdiggitydogg

if your brake fluid is topped off, it probably is the switch under the handle

nY's FiNeSt

bump

Bill W

The light will go on for two reasons for sure:

The brake fluid is low in the container mounted to the master cylinder, or,
the electrical switch on the bottom of your parking brake handle is having an issue of some kind.

Start there, as they are the easiest!

Apocolipse269

as stated above, your break light will only flash when there is a problem with the swithc

nY's FiNeSt

thanks for the input guys, i'll be sure to check them out