jimboek

when im driving on the freeway my 5 gear pops outi dont kno wuts the problem but i heard it could be my tranny or one of of my bolts are lose

EJ8_TCAN

probably tranny. Mine be4 would pop out but i did nothing to it and now its fine. its weird... check your tranny

hatchness135

time for a new tranny??? idk, but that certainly doesnt sound good

phyzJunkieCivic

Are your mounts good, if so was you rocking the motor hard enoughf to make it come out of gear?

SkoundrelUSA

Check your tranny fluid to see if its low. This happened to me once when I was coming back from the track. It had like 1/2 quart. Filled it back up (to 2.3qts) and shes good again

ekb16

iTrader: (1)

change your tranny fluid and see what happens...i bought a motor from hmotorsonline and forgot the change the tranny fluid b4 i dropped it in and it kept on poping out of 5th everytime...changed the tranny fluid and now everything is perferct

B18bEG6ick

correct me if i am wrong guys, but aren't there detent ***** on the forks where keeps it into gear?

boosted_EM1

does it only happen on the freeway? my buddy has this happen to him and it was his 5th gear syncro but his did it all the time..

93egsir

I had a similar problem but it was 3rd and 5th
I had to have the shifter assy replaced inside the tranny it was a 99 si trans

6SPD_EK

iTrader: (2)

open the hood & look at tranny while having someone shift into 5th - i had a similar problem. I had a relocated a reservior & the tranny linkage was bumping into it not allowing it to go in gear. this was on a k-swap but could be similar

Evs-One

there are detent ***** that lock the shift forks into place AND there are metal rings around the synchro that lock the synchro sleeve into place. It could be either of these or anything else

Star looking

JDMFantasy2k

there's also springs that hold the ***** up against the shift rods. You might want to undo the bolt that has the spring in there and try replacing it.

goukieg

yeah mine used to do that too then I found out my clutch was jacked up... but that was a wierd circumstance,

jimboek

got it fixed thanks guys

93egsir

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jimboek &raquo;</TD></TR><TR><TD CLASS="quote">got it fixed thanks guys </TD></TR></TABLE>


HOW? this would be a good thread if someone searches but what did you do to fix it?

Znypar

i'd like to know as well. my tranny is doing this with 3rd gear.

Boostedb20EH2

Synchro and low tranny fluid guaranteed

jimboek

new tranny fluid