jdreadjdm

well this sound first started off as as squeal like brake pads needing to be changed but it only occured when accelerating between 2200-3500 rpms, i replaced the front right cv axle so i thought eh hey maybe its just breaking in, soon to my knowledge the squeal turned into a nasty sound like your barerly scraping your exhaust on the pavement, its making me so mad its coming from the front right part of the car which is were my tranny is =/ id hate for it to be a ISB any suggestions would be helpful thanks.

jdreadjdm

Post start- the car has brand new full exhaust, headers and cat so there isnt any heatshields to my knowledge, so it isnt that.

type_r_ek

throw out bearing? mine does it at idle and when accelerating up to 2500, and i know thats it cuz my clutch is shot also

Former User

Crawl under the car and verify.

jdreadjdm

i just did no shields what so ever, if i may add that i took it for a ride this morning to get a feel of it again i pressed clutch in just to feel a little bit of resistance and gassed it and it fel like little bearings/marbles like a popping sensation in the clutch like it was ketching on something, im leaning towards throw out bearing is completley destroyed lol

grumblemarc

iTrader: (4)

Then remove the transmission and inspect it.

jdreadjdm

Well the latest word me and my father took it for a test drive and we diagnosed the sound coming from the engine bay, it sounds like metal vibrating on something because it only starts when my exhaust is at deepest tone so ill do a little tightening and smacking with a hammer =D

jdreadjdm

well i removed a heatshield above the CAT and secured a few cables and noise is still there but the noise is seeming to come from the front right wheel well i replaced the axle with a ABS axle the car has front left one non abs could this be the issue? i dont know if a wheel bearing can Rattle like it is?

Former User

Check whether the wheel splash guard is bent and rubbing on the brake rotor.