Dimensions of a 1992-95 Hatchback roof?
12-30-2011, 05:37 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2011
Location: Ballston Spa NY
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Dimensions of a 1992-95 Hatchback roof?
Hello I am wondering the dimensions of the EG6 hatchbacks roof? I am going to be putting carbon fiber vinyl on the roof, because it is weathered and also I am putting a roof rack from yakima on it as well, so there will be alot of dirt/ debris falling on it. Does anyone know the dimensions of the roof? I guess i could measure myself but i wanna see if I get a reply before I go out to do it and any suggestions of my idea. Or if someone has done this any tips they would have for me. Thanks
12-30-2011, 05:43 PM
#2
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: Dimensions of a 1992-95 Hatchback roof?
Get a 4'x4' sheet.
https://honda-tech.com/forums/showpo...postcount=3324
Some textured vinyl I got off of Ebay. Quality stuff.
https://honda-tech.com/forums/showpo...postcount=3324
Some textured vinyl I got off of Ebay. Quality stuff.
12-30-2011, 06:28 PM
#3
Honda-Tech Member
Join Date: Nov 2004
Location: pittsburgh, Eastern Shore
Posts: 674
Likes: 0
Received 1 Like
on
1 Post
Re: Dimensions of a 1992-95 Hatchback roof?
Get a 4'x4' sheet.
https://honda-tech.com/forums/showpo...postcount=3324
Some textured vinyl I got off of Ebay. Quality stuff.
https://honda-tech.com/forums/showpo...postcount=3324
Some textured vinyl I got off of Ebay. Quality stuff.
12-31-2011, 04:31 AM
#4
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: Dimensions of a 1992-95 Hatchback roof?
Thanks. Still holding up. No issues.
When you get the air bubbles the next day or so just get a pin and stick the bubbles to release the air and smooth out the finish.
I CANNOT stress the need to tape back the front and rear window moldings AS WELL as working with a clean surface.
When you get the air bubbles the next day or so just get a pin and stick the bubbles to release the air and smooth out the finish.
I CANNOT stress the need to tape back the front and rear window moldings AS WELL as working with a clean surface.
Thread
Thread Starter
Forum
Replies
Last Post
PrayingForDeath
Honda Civic (2001 - 2005)
10
01-06-2008 03:30 PM
spooned-ek
For Sale
15
06-08-2004 06:45 AM
