DC2 side mouldings in EG????
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: Australia
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
DC2 side mouldings in EG????
Surely someones tried this before. Just wondering if these DC2 side mouldings would fit in an EG hatch?
Just wanna know before i buy them.
I have a DC2 dash and kick panels in my EG hatch and the EG mouldings interfere with the DC2 kick panels. (I could modify them but i wanna use the DC2 ones if possible).
Thanks,
Paul.
Just wanna know before i buy them.
I have a DC2 dash and kick panels in my EG hatch and the EG mouldings interfere with the DC2 kick panels. (I could modify them but i wanna use the DC2 ones if possible).
Thanks,
Paul.
#7
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: Australia
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
I used the DC2 heater core part.. But the blower motor part i used from my EG as it never had A/C and allowed a nice accesible place for tucking my fusebox and it is flatter underneath which i found a great place for mounting my ECU.
It's just the centre heater core part that is different between the two. I wouldnt even bother trying to use the EG heater core personally.
Thread
Thread Starter
Forum
Replies
Last Post
Junkiii Ek
Honda Civic / Del Sol (1992 - 2000)
1
10-12-2003 02:05 PM