DC2 Front Wheel on Jack Stands, Engine ON, Neutral and wheel spin on their own?
#1
Junior Member
Thread Starter
Join Date: Dec 2006
Location: Mukilteo, WA, USA
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
DC2 Front Wheel on Jack Stands, Engine ON, Neutral and wheel spin on their own?
We notice this recently... my friend's DC2 had its front wheel on on Jack Stands, Engine ON, Neutral and wheel spin on their own. Since we are in neutral shouldnt the front wheel not be moving?
#2
Honda-Tech Member
Join Date: Jan 2007
Location: globetrotter homeworld
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: DC2 Front Wheel on Jack Stands, Engine ON, Neutral and wheel spin on their own? (JLEK)
There is always a little bit of movement, even in neutral because the input shaft is still spinning and the fluid pressure is pushing on the drive gears.
#3
Honda-Tech Member
Re: DC2 Front Wheel on Jack Stands, Engine ON, Neutral and wheel spin on their own? (JLEK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BubblegumTate »</TD></TR><TR><TD CLASS="quote">There is always a little bit of movement, even in neutral because the input shaft is still spinning and the fluid pressure is pushing on the drive gears.</TD></TR></TABLE>
and it's not enough to move the 1500lbs.+ car. I guarantee you could stop the tire VERY easily!
and it's not enough to move the 1500lbs.+ car. I guarantee you could stop the tire VERY easily!
Thread
Thread Starter
Forum
Replies
Last Post
Black R
Road Racing / Autocross & Time Attack
6
11-14-2002 10:26 AM