Aquafina

iTrader: (3)

What are the colors of the VTEC Pressure Switch wires on the plug? 96 DX with Z6 head and ECU (Boomslang harness). I cut the clip off a 92-95 VTEC engine harness. It was the only green plug that would fit the Pressure Switch. Has blue/black and solid black wires.

I just need to know if its the right clip, and what color wire goes to the ECU. I have the solid black going to the ground on the thermostat and am throwing CEL 22. Yes, I've searched, a lot.

Aquafina

iTrader: (3)

I think I have the wrong plug. Referring to Bauleys Mini-Me writeup, the plug he got from a junkyard clip (VTEC pressure plug) is yellow with a blue and a black wire.

Aquafina

iTrader: (3)

No yellow plug on the Z6 engine harness.

Tried bypassing the swtich by running a wire from pin C15 (Pres Switch for OBD2) to the VTEC solenoid wire (splied it). CEL 22 didn't go away.