ekb16a

well today i pick up my d16z6 block that i am going to built i was gonna spend my money on buying a b16a2 but i am gonna saty single cam .. i have 1800 to spend.. i want to know if u guys can help me on were to buy pistons n parts for my head .
i got the long block for 60 bucks a lil rusty but is good ill post pics
i need pistons & rods
i need valves, retainers, springs n maybe and maybe get the head p/polish

can u guys give me links of were to buy some stuff or if any selling good parts contact me

broketuner-Sol_Si

Tom @ camp1320 can really hook it up...he's located in chatsworth...not too far from LA...about 30-45min drive. hell of a nice find if it turns out to be a useable block....60 bucks sounds like it might have some serious issues

ekb16a

mah man i took the motor apart everything is good

broketuner-Sol_Si

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekb16a &raquo;</TD></TR><TR><TD CLASS="quote">mah man i took the motor apart everything is good</TD></TR></TABLE>

ok sounds good then...just make sure you go with a 75.5mm piston and bore, or if it's already been rebuilt/re honed you might have to sleeve it(I beleve service limit on stock sleeves is 75.5 mm, might be 76 though)